Portable Digital Tire Inflator - 12V 120W Air Compressor Pump

*.Just plug directly into Cigarette Lighter Socket. 12V 10AMP
*.Inflate tires on cars, bikes, sedan and midsize SUV. Adaptors for balls and inflatables included.
*.Display Units: PSI, KPA, BAR, KG/CM
*.LED FLASHLIGHT: Bright Torch
*.Auto shut off when reaching the desired tire pressure. Overheat protection shuts off automatically when overloading...
Specification:• Working voltage: DC12V
• Rating power: 120W
• Inflating Speed: 1.06 CFM
• Min. Amp: 10 Amps
• Maximum Amp: 15 Amps
• LED flashlight: Bright Torch
• Maximum Working Pressure 100 PSI
• Display Units: KPA, PSI, BAR, KG/CM..
Operating Instructions:
1. Make sure the power switch is OFF (O position) and the vehicle engine is running.
2. Remove the dust cap from the tire valve, and then attach the air chuck to the tire valve stem, and screw onto tire's valve stem.
3. Plug the power cord into a 12V cigarette lighter socket.
4. Press (M) button to choose the display unit. (4 units available: PSI, KPA, BAR, KG/CM). Press (-) or (+) button to set the desired 5. pressure, and then wait until it stops flashing.
5. Press (I) button to turn on the power switch. The compressor will automatically stop inflating once the desired pressure is reached.
6. When the desired pressure is reached, turn OFF the power by move the power switch to (O) position.
7. Unscrew the valve connector, place the tire valve dust cap back to the tire & disconnect the power cord from a 12V cigarette lighter socket.
8. How to turn on Flashlight? Move power button switch to (II) position..